-
[ Pobierz całość w formacie PDF ]
Note: in order to make the autolearning of activation/deactivation controls of the antitheft, it is
necessary to:
" connect the BLUE wire directly earthed, close the hatchback door (after programming
connect the PINK wire coming out of the boot lamp).
IMMOBILISATION POINT Fuel pump
Cut the ORANGE/WHITE wire located in the wiring harness behind the driver s side sill
cover.
STARTER Ignition block
Cut the ORANGE wire, at the position nr. 1, of the 4 way black connector coming out of the
starting push button located on the right of the steering wheel.
BONNET SWITCH Install an additional switch on the headlamp support plate, driver s side.
DOORS SWITCH Connect to the WHITE wire, at the position nr.2, of the connector coming out of the rear
lamp.
BOOT SWITCH Connect to the PINK wire, at the position nr.2, in the connector of the boot lamp.
relag03gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual. [ Pobierz całość w formacie PDF ] - zanotowane.pl
- doc.pisz.pl
- pdf.pisz.pl
- zambezia2013.opx.pl